The Hohm Tech Hohm Depot 18650 3005mah Cell is tailor-made to push where other batteries fall. It focuses on maintaining everything one would expect of Hohm Tech cells while simultaneously reducing the cost per unit of Ah.
3005mah | 16.8A CDR | 22.5A @ 80 degree cut-off
Can be charged at a tested/proven 3.60A rating with minimal impact to degradation
Amperage delivery at sustained voltages ensures powering relevant loads
Recalibrated chemistry formula comprised of DSP compounds
Progressive amperage-to-capacity and capacity-to-weight
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
Equipped with the UPS sealing compounds as extended assurance of proper operation and performance
DSP (Dual stripping process) formula and selection of raw chemistry achieves a greater cycle life than any other previous Hohm Tech cell
2nd Gen Cathode tag integration to promote reduction in internal resistance
NEW slurry stir process enables greater consistency and minimizes cell-to-cell variation
Battery capacity: 3005mah / 10.81
Continuous discharge rate: 16.8A
Max 80C | 3.2V cut-off; 22.5A
Cycle life retention: 500 @ greater or equal to 70%
Chemistry type: DSP Li-NMC
To expound on safety
Modified cathode tag consisting of higher purity aluminum is utilized to aid in lowering internal resistance
Updated poly seal with refined bitumen is installed in every cell to ensure pressure is controlled
NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int'l achieving their requirements set forth
CAN BE CHARGED AT 3.6A. This is not a misprint. 3.6A is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
TESTING BEYOND TEMPERATURE. Hohm Tech cells utilizes both static and dynamic testing that includes but is not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.